Beginner's Step-by-step Guide to Installing a New Shower Unit

Beginner's Step-by-step Guide to Installing a New Shower Unit

Blog Article

Call Today

Were you in search of help and advice about Simple ways to Install a Shower Cubicle on Your Own?

A successful shower installment needs cautious planning as well as a great deal of job. Most of the times, you will certainly need to do 3 sorts of jobs: framing walls, setting up the plumbing, and finishing walls.

Prep work

First of all, you should pick the kind of shower that you wish to mount. It is very important to establish whether the picked shower can handling certain systems and also can regulate a risk-free level of water through the boiler. A lot of shower systems nowadays are created to be versatile to various water stress (such as stored hot water as well as chilly mains).
It is also crucial to take into account the water stress and also the planning of the piping as well as drain for the shower

Various Types of Shower Units

Push-on Mixer: The hose as well as spray parts of the push-on mixer shower system can be linked to the bathroom tap as per your requirement, and also the water temperature level can be adjusted via the taps. Push-on mixers are cheap and very simple to install. Nevertheless, although the hose pipe link is basic, it is quickly removed. In addition, it is inconvenient to change the temperature.

Bath/Shower Mixer: The tube as well as spray of this type of shower are incorporated with a bathroom mixer tap, and also the temperature level can be readjusted via the bathroom taps. It is a very economical alternative and also no additional plumbing is entailed. However, the bath/shower mixers likewise struggle with inconvenient temperature level control alternatives.

Handbook Mixer: The pipe and spray of a hands-on mixer shower system belong of the wall surface unit as well as the hot and cold water products are linked to a solitary shutoff The temperature level as well as stress of the water are controlled via either one or a selection of knobs (in more expensive showers). Although temperature level control is a lot easier in hand-operated mixer types, they are more pricey than the previously mentioned mixers. They additionally call for extra plumbing of cold and hot water pipes.

Thermostatic Mixer: The hose pipe and spray of this shower type are a part of the wall unit and also the cold and hot water products are attached to a solitary shutoff below as well. It is total with an integrated stabiliser to self-adjust the water temperature level and also to prevent it from coming to be as well hot. Among the most significant benefits of a thermostatic mixer shower kind includes hassle-free temperature level control. Nevertheless, it is one of the most expensive of the various mixer choices.

Power Shower: A power shower is a single unit consisting of a powerful electric pump that is capable of changing both the water stress and temperature level. This kind of shower can be fitted if there is water from a cold water tank as well as a hot water cylinder. A power shower makes the change of both stress as well as temperature easy. On the other hand, it disagrees for water heated up directly by the shower or where the water is provided by a combination central heating boiler under mains pressure.

Electric Shower: An electrical shower is plumbed right into a mains cold water supply and it heats up the water electrically. It is necessary to note that for this shower kind to be installed, the keys pressure needs to be at the very least 0.7 kg/sq cm (10lb/sq in). The device enables the temperature level and also stress to be adjusted using a knob. Designs with temperature level stabilisers are much better as they remain unaffected by various other faucets elsewhere being used within the house. A major drawback of electric showers is that the control handle just permits the choice of heats at much less stress, or reduced temperatures at a higher pressure. This is bothersome in the winter when the spray is typically weak as well as the keys water is chillier. Nevertheless, this issue is taken on in some versions which are readily available with a winter/summer setup.

Method

Depending upon the kind of shower you want to set up, the shower head need to either be fitted in order to prevent its contact with the water in the bathroom below or the base tray, or it must have a check valve.
Prior to starting, it is a good idea to note the settings of the shower head and control, and also to prepare the pipe-work included. Furthermore, the water drainage system to eliminate the drainage will need to be intended. Both positions of the cable course as well as the shower button will certainly additionally need to be taken into consideration if an instant or electric shower system is being set up.
Make use of the instruction overview provided with the shower unit to fit the shower control.Before fitting the pipes that will provide the water to the shower system, it is necessary to remove the water supply. In order to protect the pipes, they need to be given a water resistant covering as well as likewise fitted with isolating valves. The pipelines can after that be hidden right into the wall surface and also smudged over to neaten the general look.
Fit the base tray, shower head, and installations.
Attach the main shower control to the pipelines that will be supplying the water (This may need a women screw string adapter).
Reconnect the water and test the pipes for any leakages, as some may require tightening.
If you are mounting an electrical shower, remember to turn off the power supply before making any kind of electrical links. Once these links have been made (there need to be assistance within the user's manual), the power supply can be switched back on.

Readjusting Water Pressure to Fit Your Shower

The cold water storage tank can be raised to a higher elevation (in some cases as low as 150mm (6inches)) by installation a solid wood assistance under it - possibly composed of struts and also blockboards. If you pick this alternative, the major and distribution pipes will also have to be raised to satisfy the new height of the storage tank.
Conversely, a booster pump (a single pump or a dual/twin pump) can be fitted. Whichever kind is chosen, it should be linked right into the power supply in order to run.

Piping and also Water drainage

It is best to make use of 15mm diameter supply pipelines, and also make the runs to the shower as brief and also straight as feasible so regarding keep optimal stress and also minimise warm loss. Additionally, by minimising using arm joints for pipeline corners, you can decrease the resistance in the flow of the water. You can achieve this by bending the pipelines instead.

A Lot Of Typical Blunders

Breaching or ignoring local code restrictions.

Making use of pipes that are also tiny.

Affixing copper to galvanized without using a brass or dielectric suitable in between both.

Not utilizing tape or pipe substance at threaded joints.

Not leveling your components when installing them.

Not setting up an air void filling up for fixtures.

Cutting supply stub outs too brief to mount the shutoff valves onto after the completed wall surface remains in place.

Not correctly lining up tubing right into fittings or quit shutoffs. (Requiring the nut onto the compression ring at an angle when the tubes goes to an angle will certainly cause a leak.).

When turning the water back on in your home, always run the outside hose pipe valve or flush your commodes to bleed dirt and air from the lines. This debris can cause issues in your sink faucets as well as other plumbing trim.

Most Popular Shower Enclosure Options to Upgrade Your Bathroom

Frameless Shower Enclosures

Switching to a frameless shower enclosure can instantly add a modern feel to your bathroom. This type of shower enclosure eliminates the visual obstruction of frames, providing a seamless flow using fully customisable glass.

Since they are fully customisable, it fits all sizes and shapes of your bathroom space. You can also design it in a way suitable for an expansive spa shower.

In-line Shower Options

Another popular shower enclosure option you can use to upgrade your bathroom is an in-line shower. This type of shower installs a shower glass in-line with an adjacent wall, keeping water within the shower area.

You can have two options for in-line showers: hinged doors and sliding doors. An in-line shower with hinged doors allows you to have one glass shower door mounted on one side and open the door outwards. Meanwhile, in-line showers with sliding doors will enable you to save space but are more expensive.

Semi-Frameless Shower Enclosures

The semi-frameless shower enclosure is also an excellent shower enclosure option as it reduces the possibility of mould. Since the glass door is frameless, there’s no way soap and water will be stuck on it. But to ensure that there’s no way for mould to flourish in your bathroom, choose frameless shower enclosures instead.

Semi-frameless shower enclosures are the ideal choice if you adore the design of frameless showers but would prefer a more affordable solution. These types of shower enclosures have a range of options available by the glass manufacturing process in accordance with various height specifications.

You can also customise this type of shower enclosure. However, your options might be limited because of the standard sizes and heights.

Glass Block Shower Enclosure

If you don’t want a bathroom door and walk-in glass shower enclosures are not an option either, a glass block shower enclosure is for you. Glass blocks will allow your bathroom to access maximum daylight while having the privacy it offers. Also, glass block enclosures might require a bit more effort to clean than other enclosures, but they are durable and versatile options.

You can also be creative when using glass blocks for your bathroom. Since this type of shower enclosure is made of small glass blocks, you can easily create a unique shower enclosure shape. There are many options for thickness, styles, and colours, too.

Final Thoughts

Upgrading your bathroom with a new shower enclosure is a great way to add value to your home. Not only will it appear nice, but it will also be more functional and efficient. When choosing a shower enclosure, pick one that fits the style of your bathroom and your budget. It’s also paramount to take note of the pros and cons of each type before installation to ensure you don’t miss anything important.

https://gharpedia.com/blog/shower-enclosure-to-upgrade-bathroom/

Do you enjoy reading about Simple ways to Install a Shower Cubicle on Your Own? Make a review down below. We would be interested to listen to your reactions about this write up. Hoping to see you back again soon. Liked our write up? Please share it. Help somebody else check it out. Thank you for your time. Come back soon.

Call Today

Report this page